Now touch screen electronic products become the mainstream of social development, relative to do mobile phone accessories carving machine will increase with the demand, every mobile phone accessories processing manufacturers have a lot of carving machine, but the precision carving machine because of very high, maintenance this aspect is to strictly in accordance with the requirements. Fine carving knife has the function of carving and milling machine, besides fine carving, it can also carve and milling the workpiece. In the daily production and processing use, there will often be water and oil, should pay attention to damp proof, after use, must keep the machine clean, often replace the lubrication, so as to ensure the normal operation of glass carving machine. But carving machine sometimes unavoidably idle, coupled with the workshop environment, especially the spring rain season, some parts of the carving machine is easy to rust, such as: bed, spindle, guide rail and other metal parts, if the rust carving machine, motor spindle will happen what kind of situation? -- the machine works noisily, which also slows down the production schedule and efficiency. Well, the rust of the carving machine will bring such a serious impact. Today small make up to tell you about the fine carving machine how to prevent embroidery?

1, aluminum surface, can also be sprayed with a layer of varnish. Often observe whether there are corrosion spots, should also dip in butter with a cloth every few days or evenly spray butter.

2, steel surface, screw guide rail hardened steel runner and steel fastener appearance, should be dipped in butter with a cloth every few days or evenly spray butter. Other parts, should often observe whether there is weak rust, if there is, apply a cloth with oil to wipe, and as the future rust prevention focus.

3, do not use water to wipe the cooling water tank, the cooling water tank had better be filled with emulsified oil to prevent rust.